中文  English
Product Info
Company News | Products

Attention problems in storage and use of rubber belt

    Conveyor belt (including conveyor belt, conveyor belt conveyor belt conveyor belt conveyor belt, wire rope conveyor belt) in the transport and storage, should be kept clean to avoid the sun or rain, snow dip, to prevent acid, alkali oil, organic solvents and other physical contact, and distance heating device. The temperature in the storage warehouse should be maintained at -10 40, and the relative temperature should be maintained at 50-80%RH. During storage, products must be placed into a roll, not folded, placed during turning once every quarter. Different types, specifications of the conveyor belt should not be used together, the best use of adhesive bonding method. The type, structure, specification and number of the conveyer belt shall be selected according to the condition of use. Conveyor belt running speed is generally not large and 2.5 m / s, block degree large, large wear and tear of the material and the use of fixed plow type unloading device should be used as far as possible. Conveyor drive roller diameter and the conveying belt cloth layer pass and Zhuansong drum, changed to supporting roller and roller groove angle of the idler should be in accordance with the provisions of the transport aircraft design, a reasonable selection. Feeding direction should be along the running direction of the tape. To reduce the falling material impact on the tape the chute, reduce material falling distance; inlet tape should be relationship supporting and spacing and the buffer roller, to prevent the leakage of material, with side should be using the moderately soft baffle plate, in order to avoid the retaining plate is excellent, scraping conveying belt surface.

    Conveyor belt in use should pay attention to the following items: (1) avoid roller material covered, resulting in rotary, prevent material leakage between the drum and tape to card, pay attention to the active part of the lubrication, but not greasy dirt conveyor belt; (2) to avoid starting with load; (3) tape hair deviation, should take timely corrective measures; (4) found tape local operation should be timely repair, in order to avoid the expansion; (5) from tape to avoid frame, pillar or lump material block to prevent Pengpo rip.

BACKNo News NEXTSheng Yun quality management concept
Index Products News About Us Equipment Contact
COPYRIGHT ⓒ Shandong Sheng Yun adhesive tape Co., Ltd. ICP:14034599 Technical Support:Aosion